当前位置: 首页 > 本地热动态

【崇左】【当地】 软管泵有口皆碑

     发布人:[崇左]豫信致诚机械设备有限公司
  • 更新时间: 2025-05-02 09:11:23
  • 公司邮箱 2831509198@qq.com
  • 公司名字: [崇左]豫信致诚机械设备有限公司
  • 公司地址: 崇左中站李封南会253号
  • 杨经理
    0527-88266222
    扫一扫
    扫一扫,用手机访问更方便
    【崇左】【当地】 软管泵有口皆碑,崇左豫信致诚机械设备有限公司为您提供最新【崇左】【当地】 软管泵有口皆碑产品案例,联系人:杨经理,电话:0527-88266222、0527-88266222,QQ:1779278777,发货地:中站李封南会253号。
            
    【新品发布,视频先行!】【崇左】【当地】 软管泵有口皆碑产品,等你来探!


    以下是:【崇左】【当地】 软管泵有口皆碑的图文介绍


    单管软管泵特点:
    动力消耗少,可精确计量输出;易损件少,更换时间短;独特无密封结构,不会产生泄露;自吸能力强,可达8米;可正反向运转,具有自清理能力;压轴采用滚动摩擦,泵腔无需加油;结构简单,操作维修方便;出口压力 可达1.6Mpa;输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料,不会产生任何堵塞。

    Single tube hose pump features:
    Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .

     



    软管泵的润滑保养注意事项:
    (1)侧导辊每隔24小时用油枪从注油咀注油(高温锂基脂GB5671—91)一次,注油时注意侧导辊的松紧情况,若发现过松,用尖咀钳将其旋紧,使侧导辊处于良好的润滑状态,如发现侧导辊有异常声音,经调整松紧,仍不能消除,应考虑侧导辊内铜套是否磨损,将其拆下换铜套。
    (2)压辊每隔三个月拆下来保养一次,给内腔和轴承加高温锂基脂(GB5671—91)。
    (3)转子轴承每隔三个月加高温锂基脂(GB5671—91)一次。
    (4)新的减速机在运行一段时间后,将油箱内的机油放掉,重新加30#机油。            




    豫信致诚机械设备有限公司全体员工向关心和支持我们的各级领导和各界朋友表示z u i诚挚的谢意! 在 滑模机市场竞争日趋激烈的今天,豫信致诚机械设备有限公司励精图治,奋发自强,为振兴民族 滑模机和崇左经济而奋斗不息, 公司经理携全体员工恭候各地新老宾客光临本 滑模机生产企业,实地考察、指导工作、增进了解!



    众所周知软管泵在运行时,是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是,软管存放时间不宜过长,一般以一年为限。在停工期间,对装有软管的泵,若长期不用,每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处,减弱管子回弹性,影响其流量的输送。

    It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.

     




    也许您对以下产品新闻也感兴趣

    技术支持:k797.com

    首页

    交谈

    商家电话